Rep Swirl - Yuletide Swirl

Having woven all those Rep Weave coasters it occurred to me to try a denser sett using 8/4 cotton carpet warp. Over the years my favorite sett for carpet warp has been 24 e.p.i. For this first attempt I tried 48 e.p.i, two ends per heddle for a working sett of 24 e.p.i.

Yuletide Swirl Rep Runners

Inspiration for the design came from a larger design found in the book Rep by Catharina Carlstedt and Ylva Kongbäck. I adapted a small section from the draft called “Tiger Blue” (page 84) that caught my eye and made it into a table runner.

These colors are pleasing, reminding me of Christmas cards from a bygone era, the 1950’s perhaps. And while they are red and green, they don’t necessarily shout “Christmas”.

The first Yuletide Swirl runner, the one with plied fringe gave me trouble. The places where there are “breaks” in the pattern and the white rag peeks through did not please me. Color blending happened in an area of the smallest pattern blocks and made the colors look muddy. Maybe it would have helped if I’d stuck to blending either reds or greens right there but I’d done both. Then there was trouble with the tension. I found it difficult to beam the warp properly with that many ends and with two ends per heddle.

After weaving two runners with this set-up I found it impossible to continue. I cut the first two off the loom and rethreaded the entire width, maintaining the sett of 48 e.p.i. but switching to one end per heddle. This was essentially a return to the beginning since every single end was involved in the re-thread. While I was at it I rearranged the color order in a few places taking special care in the areas with smallest blocks. It was a lot of work but as they say, “Anything worth doing is worth doing well.”

Left side of photo - Sett: 48 e.p.i., 12 dent reed, 4 ends per dent, 2 ends per heddle
Right side of photo - Sett: 48 e.p.i., 12 dent reed, 4 ends per dent, 1 end per heddle

In the end, the rethreaded runners were a huge improvement and I was far happier with them than the earlier ones. Here you see the runner on our kitchen table. For each month of the year we use a specific tablecloth, placing it beneath a tabletop glass cover. Yuletide Swirl compliments the Christmas table theme nicely.

Yuletide Swirl runner atop our Christmas-themed table cloth

Even though the colors are fabulous, I wasn’t entirely satisfied with these runners. Check back to see what happens with my next Rep Swirl project.

Warp On/Weave Off,

RepWeaver

Coasting into 2017

Okay, that’s corny but good titles can be tough to write. Sliding into 2017 might be a better heading. Snow has been on the ground every day so far this year. That’s only eight days, I know, but very unusual for any winter where we live. It seems to have prolonged the Holiday season so we can’t complain.

Rep weave coasters from the final two warps

Here are additional photos of my Christmas coasters. In all, I wove six separate warps in six different color ways. It worked out beautifully since I was able to give gifts sets of coasters, one of each color. I hope friends and family enjoy using them. They certainly were fun to make.

Sets of six made Christmas gifts

In addition to coasters, I wove a few narrow table runners. The purple one was perfect to hold our Advent candles. Sadly, I put those away before I took a photo. We use votive candle cups: three purple, one pink and one white for Advent. The little purple runner worked so well because one candle fit on each of the middle five motifs. Next year I will try to remember to post a photo.

Already this year I have one warp of table runners off the loom and finished. Today another warp is freshly beamed and ready to go. Photos to follow.

I think it's time to put the kettle on and enjoy a warm mug.

Warp On/Weave Off,

RepWeaver

Narrow table runners to match the coasters
The purple one was especially nice for placing Advent candles

Ladder Stitch Hems

Happy New Year! The Christmas season passed far too quickly for my liking. A trip to visit our grandchildren in a distant state kept us busy in December. We had a lovely time celebrating together. Then it was home again just in time for Christmas. And before we knew it, it was time to flip the calendar page. Here’s wishing 2017 proves for you a year of health, happiness and successful endeavors.

Hand hemming Christmas coasters and runners

Those on my gift list received sets of six coasters; one from each of the six warps woven in the same pattern. They were fun to weave and I managed to empty several cones of yarn in the process.

The hems are sewn by hand using the “Ladder Stitch”. Once the warp comes off the loom I use a machine triple zigzag stitch to overcast both edges between each piece. After cutting between these stitch lines hems are folded twice and Ladder Stitched. The photo shows my needle taking a stitch under two warp threads on one side of the hem, next I skip directly across to catch the very next two warp threads on the other side. When the thread is pulled up the two sides of the hem are invisibly woven together. You can find video demonstrations of the stitch on UTube. The technique is particularly effective on Rep weave due to tightly sett warp ends.

At the very bottom of this photo you can spot the edge of a tiny wad of beeswax. Since I was in my teens, this same bit of wax has lubricated and strengthened my hand sewing threads. If you prefer, there is a commercial non-wax product available that does the same job.

Another helpful tool are the colorful little clips seen here. They are called Wonder Clips and work far better than pins to secure hems before sewing them. Even if they didn’t work so well I’d want to use them because they are so cute. They come in various sizes and colors and are fun and easy to use. You can find them at your local fabric store, quilt shop or on line.

Ladder Stitch in progress
Raw edges machine triple-stitch zigzagged

These small projects have been a lot of fun. Now that the 2017 has dawned I am ready to tackle some larger pieces. May your year be filled with good health, happiness and satisfying projects. Happy New Year!

Warp On/Weave Off,

RepWeaver

Weaving Fun in Small Ways

Wee Swedish Coverlet

Photos of my final Wee Swedish Coverlet warp are probably in order. Here they are. Since this warp turned out to be other than perle cotton, it behaved differently. Shrinkage was greater. The finished cloth drapes well, better than the 100% cotton version. Overall, these are nice but I am wishing to weave some brighter colors for my next Wee Coverlets.

Wee Swedish Coverlet, Detail

Wee Swedish Coverlets
This group of coverlets drape beautifully.
The colors are pretty subdued for babies.
Maybe parents will appreciate this at laundry time.

Since last I posted life has taken a few twists and turns, some far less than pleasant. In the face of turbulent events, returning to the studio and immersing myself in weaving truly helps. Whenever calm reflection is necessary to peace of mind the studio is my go-to destination.

A box of odds and ends, mostly 8/2 cotton, had been on my shelf for a very long time. My guild sale was coming soon. It occurred to me to use some of that cotton to weave some quick coasters for the sale.

I took my first weaving class in 1988. My first exposure to Rep Weave at that time was an article by Joanne Tallarovic in issue #74 of Shuttle Spinal and Dyepot. A narrow runner in her article was the inspiration for these little coasters.

Rep Weave coasters
Notice the blue ones. One has rag as thick weft.
All the others have bright yellow cord-type yarn as thick weft.

Life intervened and I did not complete as many of these as I would have liked in time for the sale. But that is fine because Christmas is coming soon. Each of the four warps shown was an opportunity to learn and improve on the design. Exciting discoveries along the way made for a load of fun.

Blue coasters:

I wind my warps twice as long as needed but only half as wide, with a cross at each end. For Rep weave I wind two ends together. This works out great except when I forget to divide the total number of ends for the center block by four – not two. That is why that middle block is wider here than I meant for it to be. Since the extra ends were available, I just threaded them as wound.

The first few coasters on the blue warp have rag as thick weft (see group photo above). I liked that well enough until I thought to use a bright yellow cord that has been on my shelf longer than I can remember. Wow! That bit of bright yellow at the selvedges really pleases my eye.

Green coasters:

Now that is better. The center block is the proper width.

Unfortunately, in the meantime I’d forgotten to weave six thick wefts in the center. These coasters are shorter than the blue ones. Sometimes life events interrupt my train of thought. Oh, well.

Red coasters:

The challenge here was a limited supply of red and white. Making due, I used black and grey for the borders. Somewhere along the line I’d had a conversation about floating selvedges with a weaver friend. It motivated me to do something for the very first time – add floating selvedges to a Rep weave. I am never too terribly worried about matching floater color to warp color. Here I decided to go out on a limb and used a red floater next to the black border. The result made me very happy.

Yellow coasters:

Here you see more odds and ends from my box of 8/2. The border yellow is darker than the center yellow. And take a look at that floater!

Floating selvedges on Rep Weave???

What will be the next adventure? I saved the warp for a tie-on and there are still remnant cones of various colors in my box. Ideas are brewing and so is my next mug of tea. Hum, any coasters around here?

Watch for coaster hemming technique in my next post.

Warp On/Weave Off,

RepWeaver

Brewing a cup of tea with first two versions of Rep Weave coasters

Ahem, a Hem

Have you been trying to get my attention? After all, I did promise hemming photos and you have been patiently waiting. But life has a way of interfering with my plans.

The first delay occurred on October 15th. At 14½ years of age, our sweet Jenny had been ailing for quite a while. She was the best of company all her life, especially for the two years while my husband was away working on the East Coast. She was always here for me and sounded the alarm that saved our house from even worse damage in the midnight washing-machine flood. She came to us as a feral rescue cat and proved herself a lady in the best sense. Our time together came to an end the Saturday before last. My husband and I are still grieving her loss. Oh, JennyCat, how I miss you.

That same weekend my mother took two falls. I did not hear of this until Monday morning when she called to ask for a ride to the Emergency Room. Doctors there discovered a compression fracture in her spine. Poor Mom is in terrible pain. She lives in a nearby retirement home but she has needed my time and assistance.

Whenever possible I have been weaving and doing my best to be ready for the Seattle Weavers’ Guild Sale later this week. My latest Wee Coverlets are finished and I wove two stacks of little Rep Weave coasters for the sale. Watch for more photos in a later post.

In the meantime here are a few pictures to show hemming techniques that work for me. At the very least I aim to give you the confidence to finish your handwovens as you please. Remember, there is no right or wrong way, only what works best.

Here is how I weave a hem at the beginning of a Wee Coverlet:

After a contrasting weft to mark the cut line weave

11 shots tabby weft

1 shot variegated weft

12 shots tabby weft

1 shot variegated weft

14 shots tabby weft

Weave the body of the piece. At the end reverse the above weave order for another hem.

Showing contrasting dividing shot (white)
Triple stitch zig-zag overcast on cutting edge
Variegated shots to mark fold lines for the hem

Fold the hem twice, once on each variegated marking line and machine stitch close to the folded edge. I tuck a label end inside the hem and sew both with a small regular-type zig-zag stitch. My labels don't shrink so I wait to stitch the other end down after the first washing/shrinking of each piece.

Label placement has me puzzled. I used to put it in the lower right corner on the back of a piece as if it were the artist signature on a work of art. Here I decided to place it in the "return address" position as if it were on an envelope. Maybe I will go back to the first way of doing it. Maybe.

Label tucked inside and sewn down with the hem

On a side note, being rather the introvert I strive to maintain a low profile. But here you see my label  in detail and there it is (horror of horrors), my name.

A weaver friend recently asked where I got my labels which sent me searching for a web link. They were woven by Xpresa Labels. Here is what I found on their website: Xpresa Lable Examples

Uh-oh, my cover is blown!

Tamer at Xpresa was incredibly helpful. The whole process was done electronically. I created my own design using Adobe Illustrator software and sent a .pdf file to Tamer. Xpresa even wove and sent sample proofs for my approval. Their customer service is top shelf.

The finished hem

I always hem or edge finish pieces before I wash them because I think it gives a more polished finishing. Then on the first washing those stitches shrink right along with the piece. That makes the hem more secure.

Next time I will share another hemming technique and I will share photos of my latest Wee Coverlets and Rep Weave coasters.

Warp On/Weave Off,

RepWeaver (a.k.a. Claudia)

Evolving While Weaving

I heard from Jasper’s grandmother that he and his family are thrilled with the bright green and yellow Wee Coverlet. May it warm him and the lively colors delight him for years to come. Thinking of him makes me happy.

Wee Swedish Coverlet Warp #113

Fresh off the loom is my final warp of Wee Swedish Coverlets. It’s been nearly two years since I began weaving the “Norse Kitchen” draft. It’s interesting to keep working with a design over a period of time. Repeating a warp over and over offers time and opportunity for experimentation and discovery. By now I feel I know the “language” of this draft. And I made it enough my own to rename it “Swedish Kitchen” and “Swedish Wee Coverlet”.

There is always more to learn. I don’t presume to know anything more than anyone else. My constant disclaimer is, “This is what works for me right now.” Which goes to show that my techniques are constantly under review and often changing. Nothing substitutes for experience. Weaving at the loom is the perfect time to imagine and consider improvements. New ideas pop up all the time. Weaving friends, guild speakers and workshops inspire further thought. Ideas come from books, magazines and groups such as Weavolution. It’s important to admit to myself that I will never know enough while at the same time pursuing as much wisdom as possible.

Stack of 15 Wee Swedish Coverlets minus 2 already in use

Weaving many warps in order to learn as much as I can produces a surplus. Using the Swedish Kitchen draft I wove a total of 73 pieces on nine separate warps. That’s a lot of Kitchen towels and Wee Coverlets. Some of them I will keep for future gifts to family and friends. Two babies already enjoy their coverlets. Other towels and coverlets will go into the Seattle Weavers’ Guild annual sale.

Next time I will post more photos from the last Wee Coverlet warp. Here is the whole stack of 15 from three warps minus the two already in use by my granddaughter and baby Jasper.

Immediately after I snapped a few photos of the way these are hemmed, a commenter asked how I finished them. So next time you can expect to see photos of the way I sew hems.

Warp On/Weave Off,

RepWeaver

Wee Coverlet in Action

Grandbaby enjoys her Wee Coverlet

This is our newest grandchild snoozing beneath her Wee Swedish Coverlet. Mama says little one spends time examining her blanket, looking at pattern and color changes, and doesn't cry right away on waking. This makes her GrandMama very happy.

Next you see another photo of the six Wee Coverlets from my bright green warp. It was very special to me that one of my weaving friends wanted the yellow one for her new grandson, Jasper. I wish him many pleasant slumbers over a long happy childhood.

The third color way of this warp is in progress. I'm not sure if I will like this version, the colors are a bit dark. But who says baby colors must be pastel? I don't understand because babies are good at making stains. Why shouldn't their clothing and bedding be colorful to begin with? That way keeping baby things looking nice and clean is easier for parents. Colorful wraps set off a baby's natural beauty. Bright colors are happy colors.

Another view of bright green Wee Swedish Coverlets

I intend to offer one or two Wee Coverlets at the Seattle Weavers' Guild annual sale October 27-29, 2016 at St. Marks' Cathedral. If you are interested and in the area, please stop by. Our guild is a group of many talented weavers whose incredible work will be on display. Even if you do not wish to buy, you will not be disappointed with the show of beautiful handwovens. And, as a bonus, weavers are very nice people. Stop by and say hello.

Warp on/Weave off,

RepWeaver

Each One Precious

Wee Swedish Coverlets for Baby by RepWeaver

Weaving Wee Coverlets takes time. Each one is a labor of love. And that is how it should be. Time spent weaving these is perfect for contemplation. For me it really, truly is about devotion. It is my way of adding color, texture and warmth to new lives. Most importantly, it is my expression of love for little ones. Babies are so very precious. May babies and children ever be wrapped in love; may they ever feel precious and cherished. That is my wish for every child wrapped in a Wee Coverlet.

When UKI discontinued 20/2 perle cotton in colors, I ordered several cones from The Georgia Yarn Company. Choices were limited and, without sample cards, color names were all I had. Maybe there was a thumbnail shot of each color, but screens vary. So when the yarn arrived I was surprised at the intensity of this green. The color name is “Kelly Green”. I’d imagined it would be darker. Here was a challenge.

Wee Swedish Coverlet by RepWeaver
Showing Front Side

The warp and Tabby are Kelly Green with purple and yellow stripes plus occasional variegated ends. This particular variegation wasn't as bright. It has teal green, yellow, purple and white and was a bit of a stretch. The two sides of each piece are very different from one another. Variegated ends show more on the underside.

Wee Swedish Coverlet by RepWeaver
Showing Reverse Side

Recently I showed these latest Wee Coverlets to a group of my weaving friends. One of them asked if I thought there were any bad color combinations. I took this as a compliment as it is an excellent question. After a moment’s thought I replied, “Yes”. My idea of a bad color combination is one in which color values are too similar. If value and intensity are too close, pattern and structure can be lost. Scale also plays a part. Equal parts of similarly valued colors compete equally for attention. It is better to use more of one or the other. The “bad colors” question is food for further thought. What a great question!

Weaving this warp of Wee Swedish Coverlets was pure joy. The brightness of the warp and frequent color changes in the included variegated ends added interest. I wish for these six little blankets to swaddle six precious infants well into childhood. Younger siblings may enjoy them, too. That is if the older isn’t a “Linus”, clinging to his blanket for security. Or perhaps a beautiful beloved blankie will be too treasured to relinquish.

Warp On/Weave Off,

RepWeaver

Wee Swedish Coverlets by RepWeaver

Wee Swedish Coverlets, Continued

Wee Swedish Coverlets by RepWeaver

After lengthy procrastination, finally I have a few more photos of my Wee Swedish Coverlets. For the longest time they sat in a neat folded stack on my kitchen island. My camera sat atop the stack.

These blankets are crib sized but still large enough to challenge my photographing capabilities. Perhaps if I had a crib it would have been easier to stage them. These are not excuses so much as evidence of my lack of confidence. In any case, here is what I managed to capture today. Perhaps these photos will give you a better sense of my Wee Coverlets. Now I can email photos to my daughter so she will be able to choose one of these for our tiny grandchild.

Wee Swedish Coverlets showing both fronts and backs

Weaving progresses on the second color way of these coverlets. I am working on the fifth one on the bright green warp and chose a bright pink for the pattern weft. We’ll see how that combination works. Until it is finished and washed I will not know for sure.

Warp On/Weave Off,

RepWeaver

Wee Swedish Coverlets

Finishing Touches

Trimming ends with appliqué scissors

When I take cloth from my loom I hem or edge finish the pieces before I wash them. After that  they go right into the washing machine with warm water and regular detergent. Next they go into the dryer until nearly dry. After that I press them until dry. 

It isn't until then that I take a close final look at each piece. Next comes trimming off all the little loose ends left from refilling shuttles or changing colors. I think of it as akin to writing "The End" after the final chapter of a book, not that I have ever written a book. But the final step in a project is satisfying, a certain kind of fun.

Do you have one of these? This little appliqué scissors is made by Gingher. Its sharply pointed and curved blades make trimming ends neat and accurate.

Right now I am about half-way through weaving a second warp of Swedish Wee Coverlets. The color is eye-popping. Some tiny children are going to love these. Let's hope their Papas and their Mamas like them, too.

Warp On/Weave Off,

RepWeaver