When Seattle’s Nordic Heritage Museum packed up the old place and
moved into their shiny new building they unloaded old, non-museum-quality
stuff. You know how it is during a move. They offered several boxes of cut/torn
rolled rags to my weaver’s guild. Two of the boxes found their way to me.
 |
| Toothbrush rug from narrower rag strips |
Enter the toothbrush (rug). Well, I don’t actually use a toothbrush since the old style is virtually extinct although one at last has been found and properly carved into a point. But that is beside the point. The name has very little to do with the technique being the name of the old homemade tool used to make these rugs.
 |
| Toothbrush rug, detail |
Normally toothbrush rug technique calls for rags strips 1½ to 2
inches wide. The rags I’d been given were only 1 to ¾ inches wide. But they
were worth a try.
Here is the result: a finer rug than the usual. It looks good and
works well in our Powder Room. If it holds up I will switch to narrower rag
strips in future toothbrush projects.
A study group I attend is studying Crepe Weaves. Having very slim
experience with this structure I began thinking it would be a quick study. Did
I ever have a lot to learn. It isn’t!
 |
| First attempt at weaving crepe |
Putting together a threading from one source and a tie-up from
another that seemed like a winning combination. Choosing two similar shades of green
10/2 perle cotton I chose a sett of 30 e.p.i. and dressed my loom. The result produced the required overall pebbled crepe effect. But the cloth seemed heavy and did not satisfy me. It’s time
to think again and head back to the drawing board.
May the learning continue.
Warp On/Weave Off,
RepWeaver
(P.S. What a difference a comma makes!)
