Wee Pine Tree Coverlets for Baby Showing both top and reverse sides |
My previous Summer & Winter towel project was the warm-up act for these Wee Pine Tree Coverlets for Baby. The towels were 17" wide in the reed. These little coverlets were 37" wide in the reed for a finished width of 33" wide.
Wee Pine Tree Coverlet for Baby To show tree trunk colors |
Again I placed four darker brown ends and one subtly variegated end through the center of each tree trunk in both warp and weft. The resulting grid pattern is pleasing to the eye.
I began the warp weaving topside up, lifting five harnesses against three sinking ones. Never have I dropped shuttles as often. After the first piece I re-tied and wove the remaining three from the reverse side.
Wee Pine Tree Coverlets |
The first three coverlets are all woven using 10/2 perle cotton as pattern weft. The bright, bright "sunburst" green coverlet was the final one of this warp. True to form, I waited until the last one to "go out on a limb" and try something slightly different. The bright green came from a friend of a friend who had been a machine knitter. At 14/2, it was an odd size for weaving. But it was cheerfully bright and soft so I tried using a double strand. The result is a soft blanket with slightly more weight than the others. It is slightly out of square but lovely none-the-less.
Wee Pine Tree Coverlets |
Yes,
these were trouble. In spite of it and of a few obvious errors here and there, these are four sweet Wee Pine Tree Coverlets. I hope four precious little ones enjoy snuggling sweetly beneath them one day.
Warp
On/Weave Off,
RepWeaver